Filtration

Our process creates a one-piece, fiberglass reinforced tank with superior strength and durability. Tagelus Top Mount Filters are equipped with a six-position, top-mounted multiport valve.

• Special lateral design provides superior flow characteristics and long filter cycles for economical operation
• Maximum Operating Pressure 50 psi
• Combination water and sand drain makes servicing and winterizing fast and easy
• 40, 50, and 60D models standard with plastic clamp
• Note: Operating Limits – maximum continual operating pressure of 50 psi. Maximum operating water temperature (internal filter) 104°F (40°C).

For commercial and high-end residential swimming pools and other water applications. Available in flow rates from 98 to 141 gallons per minute.

• High Capacity Fiberglass Side Mount Sand Filter without Valves
• This filter series features multiple diverters for increased filtration rates in commercial applications up to 20 GPM/Sq. Ft.
• Maximum Operating Pressure 50 psi
• Full 2 in. Drain
• 8 in. opening for easy access to sand bed
• The Triton C-3 features standard 3 in. flange connections

Cartridge Filters

The Posi-Clear RP Cartridge Filter features a fiberglass-reinforced, chemical-resistant, polypropylene tank with no-tool servicing for easier cleaning. It also features a side-entry port, which provides nearly 50% more efficiency than any other single-cartridge filter available. Inside, it has increased cartridge surface consistency to block and trap particles as small as 20 microns. The result is picture-perfect pool water and lower energy use.

• Innovative lock ring provides a leak-proof seal
• Easy and safe cartridge removal and maintenance
• 1.5-in. drain for quick maintenance
• Single-piece, fiberglass-reinforced polypropylene tank for strength and corrosion resistance
• Integrated Continuous High-flow Manual Air Relief Valve*
• Available in 100-, 150-, 200-sq.-ft. sizes
• Note: Actual system flow will depend on plumbing size and other system components.
• Note: Pentair Pool Products and Pentair Aquatic Systems do not recommend flow rates above 150 GPM.
• Note: Operating limits—Maximum continual operating pressure of 50 psi. Pool/spa (bather) applications, maximum operating water temperature (internal filter) 104° F (40° C).
• *Integrated Continuous High Flow Internal Air Relief is operational only when there is unobstructed flow in the circulating system.